Facet 40107 Cube Solid State Competition Fuel Pump 12V

Electric fuel pump for high-performance carbureted engines up to approx. 180 PK
The Facet CUBE 40107 COMPETITION is a powerful and highly reliable electric fuel pump, specifically designed for demanding applications such as motorsport, custom builds, and classic vehicles. Its solid-state, maintenance-free designwithout bearings, open electrical contacts, or aging diaphragmsensures consistent performance under tough conditions.
Applications:
Suitable for virtually all carbureted engines in cars, classics, vans, generators, agricultural machinery, boats, and construction equipment. Compatible with gasoline, diesel, biodiesel, alcohol blends, E85, and fuel additives.
Please note: Not suitable for use with methanol or in the aviation industry.
Technical Specifications:
Type: Facet Cube Solid State COMPETITION (40107).
Voltage: 12 Volt.
Ground: Negative.
Operating pressure: 0.48 0.68 bar (7 10 psi).
Flow rate: 128 liters per hour.
Dry lift: 0.3 meters.
Thread size: 1/8 NPTF.
Average lifespan (MTBF): 6000 hours.
Dimensions (L x H): 75 x 60 mm.
Weight: 0.5 kg.
Operating temperature: -4.4 C to +82 C.
Check valve / positive shut-off: No.
Certification: Complies with EEC 95/54 standards.
Installation Tips:
We recommend you install a 3A fuse to every installation.
Mount the pump as close to the fuel tank as possible, ideally lower than the lowest fluid level in the tank for optimal performance.
Use Loctite 243 on fuel fittings to ensure a leak-free seal.
Easy to install with only two bolts thanks to its compact design.
Depending on your vehicle and carburetor setup, a pressure regulator may be required. Always check the specifications for your fuel system.
This is the Facet 40107 pump only. Mounting hardware and fittings are sold separately.