Sway Bars Pontiac LeMans 1978-1981 Front and Rear Spohn Performance

For the 1978-1981 Pontiac LeMans. Spohn Performance RRx Series Sway Bars are one of the best handling improvements you can make to your 1978-1988 GM G-Body. Spohn RRx Series Sway Bars deliver the ultimate handling performance upgrade for AutoX, road racing or corner carving street suspensions. If youre looking for the best, look no further than Spohn RRx Series front and rear sway bars equipped with spherical end links. Made in the U.S.A.
Spohn Sway Bars dramatically reduce body roll and greatly increase your cornering capabilities. Dont skimp on the foundation of your suspension!
Included are both front and rear sway bars, hardware, bracketry and end links with this full kit.
Front Sway Bars Spohn RRx Series 1.375 diameter lightweight tubular front sway bar is made from 3/16 wall 4130N chrome moly tubing. This sway bar is precision CNC formed and a true one-piece, hollow sway bar design. Made in the U.S.A.
Spohn TIG welds the end seams to keep the elements out. End link tabs feature machined chamfers to fully seal the sway bar. Spohn RRx Series front sway bars are over 10 pounds lighter than a comparable diameter solid bar providing exceptional performance at a fraction of the weight.
RRx Series sway bars are put through an extensive manufacturing process to ensure that the final product will be the strongest, and most durable front sway bar on the market. These high-quality standards ensure greater consistency and a longer lifespan when upgrading to Spohn RRx Series front sway bars.
Spherical front sway bar end links included will connect to your front lower a-arm with a chrome plated self-lubricating Teflon lined chrome moly spherical joint. These joints provide a bind-free connection for maximum handling performance. The amount of stress applied to the front sway bar end links is severe and you need an end link that is not going to flex and/or bind up to obtain the maximum handling performance youre looking for.
Spohn RRx Series front sway bars are a true bolt-on design that can be installed with basic hand tools offering easy installation of this complete sway bar system. Spohn RRx Series Sway Bars available at Aldan American are built to the highest specs offered and include all options available along with the bar finish being offered in high-gloss, black powder coat.
The RRx Series front sway bar kit includes new polyurethane sway bar bushings with grease fittings and spherical end links, everything you need for an easy bolt in installation and the ultimate in suspension handling performance.
Rear RRx Series Sway Bars from Spohn Performance are three-way adjustable offering one of the best suspension upgrades you can make for your 1978-1988 GM G-Body muscle car. The factory method of attaching the rear sway bar to the rear lower control arms is inexpensive to manufacture but leaves performance gains on the table Spohn RRx Series, rear, adjustable sway bars solve this and deliver better handling and overall suspension performance. Made in the U.S.A.
The G-Body rear suspension trailing arms have tons of leverage which limits the effectiveness of the factory rear sway bar. This is why you sometimes see overkill rear sway bars for these cars. The other problem is that when the suspension articulates the bar causes it to bind up. The bigger the bar, the more it binds on rear setups.
Spohn Performance has solved this big bar issue. Spohns three-way adjustable rear sway bar uses spherical end links mounted to the upper frame crossmember with Teflon lined spherical rod ends for bind-free articulation. Spohn takes it one step further by including heavy-duty 5/8 spherical rod ends with a Teflon self-lubricating races.
Spohns combination above for G-Body rear sway bars allows for much higher rates and performance with running a smaller (22mm) and lighter, rear sway bar. RRx Series rear sway bars allow easily adjustment of the sway bar for soft, medium, or firm settings. These rear sway bar adjustments can be made within minutes to tune oversteer or understeer, and you can use the firmest setting at the drag strip for flatter launches!
Spohn bar stock is 22mm (7/8) diameter, heat treated solid 4140 spring grade chrome moly steel. The rear sway bar is entirely heat formed and a true one-piece design. Like all Spohn Performance parts RRx Series rear sway bars are put through an extensive quality control process to ensure the final product will be the strongest, most durable bar on the market. These high standards offer longer use and greater performance on the street or at the track.
This rear sway bar will work with factory, or aftermarket rear axle housings (Select OEM 7.5 10-Bolt Stock or GN 8.5 10-Bolt 3.0 from the selector above). Spohn RRx Series rear sway bars will clear all aftermarket exhausts and suspension components. Spohn RRx Series Sway Bars available at Aldan American are built to the highest specs offered and include all options available along with the bar finish being offered in high-gloss, black powder coat.
If youre looking to replace or upgrade your GM G-Body front and rear sway bars, this complete kit from Spohn Performance is one of the best upgrades you can make for your GM Muscle Car. Designed to improve handling, cornering and overall ride quality for Pro Touring and Daily Driven muscle cars.
Includes Spohn RRx Series Front and Rear, Sway Bars, Kit
Sway Bar End-Links Included
Easy 100% bolt in installation with the use of basic hand tools
Made in the U.S.A.
Front Sway Bar Specs: 1.375 in. (34.925mm) diameter, 3/16 wall 4130N chrome moly tubing
Front Sway Bar Design: Tubular, Hollow, Fixed
Front Sway Bar Feature: TIG welded end seams
Front Sway Bar Tabs: End link tabs have machined chamfers to fully seal the sway bar
Front Sway Bar Bushings: Polyurethane
Front Sway Bar Finish: High-Gloss Black Powder Coat
Rear Sway Bar Specs: 7/8 in. (22mm) diameter, heat treated solid 4140 chrome moly
Rear Sway Bar Design: Solid, 3-Way Adjustable
Rear Sway Bar Feature: Features three (3) adjustable stiffness settings (soft medium firm)
Rear Sway Bar End-Links: 15/16 x .156 wall 4140 chrome moly extreme duty end link adjusters
Rear Sway Bar Races: 5/8 chrome moly spherical joints with Teflon self-lubricating races
Rear Sway Bar U-Bolts: Heavy-duty 7/16 U-bolts
Rear Sway Bar Bushings: Polyurethane sway bar bushings with grease fittings
Rear Sway Bar Finish: High-Gloss Black Powder Coat
Rear CNC laser cut and formed 3/16 steel mounting saddles with grip-lock teeth (no welding on the rear axle housing required)
*Note: Select OEM 7.5 10-Bolt-Stock or GN 8.5 10-Bolt-3.0 from the selector above
Hardware included