Control Arms GMC C1500 Suburban 1988-1998 Front, Upper and Lower Stone Fab

For the 19881998 GMC C1500 Suburban. Upgrade your 88-98 2wd Suburban with Stone Fabs, fabricated upper and lower control arms. Made in the U.S.A. and designed for GM OBS trucks and SUVs looking for the perfect stance and superior ride quality.
This kit includes upper and lower control arms that narrow the front track width 3 overall (1.5 per side) to increase front wheel clearance for wider wheels and tires. This is ideal for lowered trucks looking to run 5 or more drop on their front suspension.
Stone Fab lower arms include 2 of drop built-in, and when paired with coilovers (sold separately) and drop spindles (sold separately), you can achieve up to 6 of total front drop.
These powder-coated arms ship fully assembled with Moog ball joints, polyurethane bushings, and mounting tabs for Stone Fabs splined sway bar kit (sold separately).
Original inner and outer tie rods can be reused but must be trimmed 3/4 each or upgraded to the Stone Custom Fab Heim joint steering linkage kit (sold separately)
If youre looking to properly lower your 88-98 GMT400 series 2wd pickup or SUV with some of the best control arms on the market, look no further than Stone Fabs upper and lower control arm setup.
*Note: Stock sway bars are not compatible with these control arms. You must use Stone Fab splined sway bar setup for proper fitment. *See Aldan American part number A0266 for the complete Sway Bar kit (Required)
*Note: See Aldan American part number A0267 for the Stone Fab Steering linkage kit.
*Note: Looking for coilovers? See Aldan American part number series 300220 for the Stone Fab series coilovers designed for these control arms.
2 Lowered, Front Control Arms
Control Arm Location: Front
Includes Stone Fab Upper and Lower Control Arms
Narrows front track width 3 overall (1.5 per side)
Polyurethane Bushings Included
Upper and lower MOOG Ball Joints Included
Control Arms Black Powder Coat
Bolt-on design for factory like fitment and easy installation
Note: Stock sway bars are not compatible. Use Aldan Sway Bar Part #A0266
Note: Tie Rods must be trimmed or use Aldan Part #A0267
Made in the U.S.A.