CRC Weld Check Weld Cleaner & Penetrant Remover 311 gram Aerosol (Quantity: 12)

Description
Part 1 of CRC’s 3-part Weld Check system, this system is used for the non-destructive testing of metal surfaces by liquid penetration method.
Free of 1,1,1-trochloroethane or other chlorinated solvents.
Use to retreat weld surface after locating imperfections.
Effective wash-away of contaminants and colored penetrant.
Leaves no residue.
Imported from USA (Sizes & Specifications are based on the USA Market).
CRC Weld Check cleaner and penetrant remover is a quick drying
solvent cleaner/degreaser and excess penetrant remover for the
nondestructive testing of metal surfaces by liquid penetrant
inspection. Many cracks in engineering materials can be deep in
spite of having a very small opening width on the surface and can
cause very serious defects. By normal visual inspection such
cracks may be very difficult to detect, but penetrant flaw
detection is an extension of the visual inspection method. Part 1
of CRC’s 3-part Weld Check system, this system is used for the
non-destructive testing of metal surfaces by liquid penetration
method. CRC Weld Check cleaner and penetrant remover is a
non-chlorinated, fast drying, powerful degreasing solvent for the
removal of dirt, grime and contaminants. It is designed for the
pre-treatment of the surface, prior to liquid penetrant
inspection and to remove all visible, colored traces of the
penetrant. Non-destructive inspection of materials, parts,
assemblies, equipment, surfaces or structures. Detects the
following: cracks, lack of fusion and open cavities in welded
parts; cracks and cavities caused by metal fatigue and cutting
operations; porosity or leaks in pipes, tanks, boilers, heat
exchangers; discontinuities, laps, folds and cracks in castings,
forgings and ceramics.